ToToTEK.COM

Hi!

Yeah, you need a male-male parallel cable (Like this http://www.smcelectronics.com/CMPCAB12.JPG ), and a PC with an LPT port (the parallel port). From there, you can use a program called uCON64 ...

Hi!

Maybe you should try transfering some ROM using the parallel port instead of floppies, that way you can rule out floppies. Otherwise, I don't know what could be wrong =/

I had almost the sam ...

I own a few PAL SNES's and I've managed to use my GD SF7 on all of them (even the 50/60hz modded one) without problems. Hopefully this information is helpful.

Before opening a SNES you should unplug the power lead then switch it on. You will see the power LED flash briefly. Doing this drains the power inside the console. You have much less chance of blowing ...

Yep, there's a fuse in there, it's along the side, follow where the power goes in and you'll see. If a system doesn't turn on, this is most likely the reason why. Either replace the fuse, or just ju ...

Is your SNES only doing this when you're using the copier?
If it does the same thing with cartridges it might be a dirty connector or something. I'm not sure though, just taking a wild guess.

Also, is it possible to make your own CD7 external CD-ROM unit for use with the GDSF7 ?

Yes, I think it is possible, but it's not that easy to find the parts. You'd need an MKE cd-rom reader with ...

Never mind, I managed to fix it by changing my LPT in my comp's BIOS to another mode, and using --xgd3 instead of --xgd6

I just bought a game doctor SF7, and I'm trying to transfer games to it using the parallel port. For this, I bought a 3m cable so it could reach from my computer to the SF7. I tried installing Ucon64, ...

The read/write error could be two things (that I know):

Bad floppies
Bad floppy drive

Try formatting the floppies in the drive, and then try putting the games on them.

Hope this will help yo ...

There was a Super Pro Fighter Q+ without a parallel port, I know cause I've got one.

Data33

Do you think it would be possible to chat with you over MSN, cause I really need some help with this.

Many thanks,
Data33

Hehe, right.. I'll check that.
*edit*
The ones on my board has 28 "legs" while the ones I found had 26 "legs", is that a problem or could it still work?

Thanks,
Data33

Ok, cool.. but will the ones I found work?

Thanks,
Data33

About the battery, my SPF didn't have any.. it had a condensator (sp?), but I just switched it. *edit* Yeah, it works now - I put three 1.2V NiMh batteries in a series in there :p

I've found like a ...