ToToTEK.COM

I added the last 2 chips (bottom) and since I have 0 in Dram.
I followed the scheme "tcdev" :
http://members.iinet.net.au/~msmcdoug/consoles/SMD_DRAM_schematic.pdf
I add same capacitors ...

I had a solder bridge.I tought there was a bad chip but not.
Unfortunately i unsolded this chip and i have damaged the card.I add "personal connections" and it works.It will be difficult no ...

I did well as the following model:
xx xx
xx xx
xx xx
-- --
I intend to ask the last 2 for 32M but I am editing my current work.

Is it possible to display 24M while only supports 16M?

Is it possible to display 24M while only supports 16M?

I added two identical chips like others and it shows now 24M.
Unfortunately I have a black screen for each game launched by floppy (Those games worked before when the SPFQ was 16M). I managed once to ...

I hoped to connect old SIMM 72 pins (only 40 pins of 72 pins) to the connector (40 pins).
I unsolded 1 chip from the simm and i placed on the board but the Dram is 16M (not 20M).Maybe a pin is badly ...

I founded an old SIMM 72 pins (with good chips) but it's difficult to take away memory chips and put after on RAM board.
Is it possible to have an assembly to "transform" old simm 72 pins 3 ...

It was just to have bios with real time save (i don't have it) but Eprom Programmer is too expensive for that...

Hi
How could i use bios for my super pro fighter q?
I put bios on a floppy disk like a rom?

Thanks for answer.I will add the same memory chips (KM44C1000BJ-7) on 4 empty slots.

Ok.I will try to find 4 others dram (KM44C1000BJ-7) because i have 4 empty slots.Maybe it will work...

Thanks for answer. How much of MB can support the Super pro fighter Q (24 or 32)?

Hi,
I have a super pro fighter q 16MB and i want to upgrade it to 32MB.
Can i use Transcend's IDE Flash Module 32MB with 40 pin to replace original 16MB card 40 pin?