View previous topic :: View next topic |
Author |
Message |
senchang
Joined: 10 Apr 2009 Posts: 3
|
Posted: Fri Apr 10, 2009 11:32 pm Post subject: can SWC DX Change Region with CIC Chip |
|
|
Hi i have SWC DX Super Wild Card 32Mb It's NTSC Version
Can i Change To PAL Version To Run on PAL SNES Just By Change CIC Chip to PAL CIC on SWC DX motherboard ??
Do i Need To Do Anything Else ?? Jumpers ?Software ?? BIOS ??
Anyone Has User guide For SWC DX ??
Many Thanks |
|
Back to top |
|
|
maxmofo
Joined: 11 Jan 2009 Posts: 16
|
Posted: Mon Apr 20, 2009 12:57 am Post subject: Re: can SWC DX Change Region with CIC Chip |
|
|
senchang wrote: |
Can i Change To PAL Version To Run on PAL SNES Just By Change CIC Chip to PAL CIC on SWC DX motherboard ??
|
Hi Senchang. Yes, you can. I had a PAL SWC DX. I first used the T-Connector sold by Tomy to test it with an NTSC CIC just to make sure it worked... I then swapped the CIC on the mobo. It's easy, the CIC pulls right out and you just pop the new one in. |
|
Back to top |
|
|
senchang
Joined: 10 Apr 2009 Posts: 3
|
Posted: Mon Apr 20, 2009 2:39 am Post subject: |
|
|
Cool !!
Thanks To Confirm This
The CIC Gets Very Confuse.........As infos From internet All Saying Different Things
Only nintendo Uses Official CIC Chip Which Are F411NTSC /F413 PAL
However With Copiers They Don't Use Nintendo's Official CIC Chip
Which Makes Harder To Find Which Chip is CIC And To Replace
I Know
nintendo's
F411 D411 Are NTSC CIC
F413 D413 Are Pal CIC
nintendos ntsc-cic D411 is eqivalent to the 74ls161.
i know NTSC CIC used On My Copiers are
ST10198S 22088 Game Partner II / SF 6
ST 10198S 11087 SWC DX
But I Had Other Copiers I Can't Find Them .......
Gamars
Super Tool
And intercepter super disk
one chip i think may be NTSC CIC is
On Super tool
Gold star
GD74LS161A
A9418
On Gamars
CIVIC
74LS11
On interceptor superdisk
CIVIC
74LS11
same chip as gamars
any idea?? |
|
Back to top |
|
|
|