View previous topic :: View next topic |
Author |
Message |
feast
Joined: 26 Jan 2010 Posts: 8
|
Posted: Fri Jan 29, 2010 5:56 am Post subject: can i use aus pal power adapter on japanese super famicom? |
|
|
hey, i need to know if an australian pal snes power adapter will work with a japanese snes,
as far as i know, they are both 9v DC 850ma, but does the 50/60hz difference amount to any problems?
thanks in advance |
|
Back to top |
|
|
MottZilla
Joined: 08 Sep 2004 Posts: 765
|
Posted: Fri Jan 29, 2010 6:40 pm Post subject: |
|
|
If you are absolutely sure both are DC, not AC, they should probably work. I do know that PAL European SNES AC adapters output AC as there is a warning on the website about it. But if your AUS SNES takes 10 Volts, DC, Center Negative, it should be good. The 50/60hz really means nothing. |
|
Back to top |
|
|
tak
Joined: 24 Jun 2007 Posts: 28
|
Posted: Sat Jan 30, 2010 12:46 pm Post subject: |
|
|
I'm using a MD1 (europe 220v) power supply for my Super Famicom.
Since I know there are diffrent PSU for the europen MD1: I'm not responsible for damage on your SFC |
|
Back to top |
|
|
|