View previous topic :: View next topic |
Author |
Message |
Tupin
Joined: 05 Apr 2010 Posts: 9
|
Posted: Thu May 13, 2010 10:53 pm Post subject: 0MB error. |
|
|
Okay, so I set the Parallel port to EPP, set it to 278, and booted the program. I had the parallel plugged in, the USB plugged in, and I turned on the programmer. It flashed that it had 32MB for like a second, and then went back to 0MB.
Also, it didn't boot up to anything when I plugged it in before I did anything. Is that normal? |
|
Back to top |
|
|
Tupin
Joined: 05 Apr 2010 Posts: 9
|
Posted: Fri May 14, 2010 8:59 pm Post subject: |
|
|
Oh, and the games don't show up as having the correct size until you attempt to load one once. |
|
Back to top |
|
|
Tupin
Joined: 05 Apr 2010 Posts: 9
|
Posted: Fri May 14, 2010 11:55 pm Post subject: |
|
|
Just checking, I'm supposed to install 1.4, then download 1.5 and place the 1.5 .exe where? In the "patch" folder? Do I start up 1.4 or 1.5 after that?
I'm trying to eliminate all possible problems. |
|
Back to top |
|
|
Tomy Site Admin
Joined: 02 Aug 2005 Posts: 422
|
Posted: Sat May 15, 2010 11:12 pm Post subject: |
|
|
Overwrite the 1.4 exe. Please try and give me result.
And you need to click on USA mode from the software.
(Because your PCE is TG16) |
|
Back to top |
|
|
Tupin
Joined: 05 Apr 2010 Posts: 9
|
Posted: Sun May 16, 2010 4:59 am Post subject: |
|
|
How do I overwrite it? |
|
Back to top |
|
|
Tomy Site Admin
Joined: 02 Aug 2005 Posts: 422
|
Posted: Sun May 16, 2010 3:49 pm Post subject: |
|
|
Put it in the same directory (v1.4 install), then run it. |
|
Back to top |
|
|
|