View previous topic :: View next topic |
Author |
Message |
joshwaan2k
Joined: 13 Aug 2003 Posts: 19
|
Posted: Wed Sep 14, 2005 3:33 am Post subject: Buying a new SuperFlash Cart questions |
|
|
Hi guys
I'm finally going to buy one
Just wondering some things
1. I'm from Australia and have a Pal Machine, do I do the following:
Just plug the Cart into the machine and send roms over with the parrel cable or is there something else I need to do?
Do I need to modify the machine, like you do to use the doctor SF7?
Is the SUPER-FLASH 64M Card kit with case for SNEX one the best to go with?
I want to try Secret of Evermore, and Weapon Lord rom as it's very had to get in Australia, I use to own it years ago.
Also how much it cost for EMS to Australia Tomy?
Also good luck with the n64 kit, I can't wait for that
Cheers
Josh |
|
Back to top |
|
|
WhiteDRG
Joined: 25 Jan 2005 Posts: 41
|
Posted: Wed Sep 14, 2005 8:53 am Post subject: |
|
|
Install software ,plug the cart into the Programmer, send ROMs. Some ROMs need to be modified a bit, eg, copy protections have to be removed. Tools used by me are SNESTOOL and uCon64. i don't use uCon64 to send games to SFC, but this is also possible.
You need a parallel and the USB cable, both can be ordered here. Please do so, it is the best way to avoid problems with cables.
You should buy the T-connector, or have a Pro Action Replay or any other device that lets you play foreign games on our SNES. You can also desolder a CIC chip from one of your PAL games ( or better buy a crappy one for a few bucks ) and solder it into the SFC. You can use the case of this game to put the SFC into it, only two little pieces of plastic have to be cut out.
Secret of Evermore works great with SFC.
If you are interested and can read german, I once made a tutorial for a friend : " How to use SuperFlashCart and how to mod ROMs to get them to work". It is a nice pdf, and delivers a good start and all my knowledge about the stuff. It is pretty helpfull. So please tell me. |
|
Back to top |
|
|
joshwaan2k
Joined: 13 Aug 2003 Posts: 19
|
Posted: Thu Sep 15, 2005 6:40 am Post subject: |
|
|
Cool
So I can play all pal roms,but I need the T connector for my Pal machine to play US roms?
Also how do I install this T Connector
Cheers
Josh |
|
Back to top |
|
|
undo
Joined: 27 Jan 2005 Posts: 6
|
Posted: Thu Sep 15, 2005 4:38 pm Post subject: |
|
|
joshwaan2k,
The T Connector works like a bridge between the Super Famicom and flashcart, no installation needed.
If you've got a NTSC CIC on the flashcart or if you've got none, you'll need the TConnector.
Simply plug the TConnector into your Super Famicom like an ordinary cart, with your flashcart connected at the top, now connect a PAL (in your case) cartridge to the back of the TConnector, enabling the flashcart to use the PAL CIC from the PAL cartridge.
I'd suggest that you solder a PAL CIC unto the PCB of the flashcart and use ucon64 to remove region protections (not always needed though). Then you should be able to play most games by simply plugging the cart straight into your Super Famicom.
This however doesn't change the fact of the differences between a PAL and NTSC system, ie. NTSC games runs slower on a PAL system. You can modify your PAL Super Famicom to be both regionfree and switchable between 50/60hz to ensure correct timing. But it's not necessary to do in order to enjoy the flashcart.
You can check the shipping cost if you've placed your goods in the shopping cart. Just select your shipping-preference and country.
Undo. _________________ love asm. loath oop. |
|
Back to top |
|
|
joshwaan2k
Joined: 13 Aug 2003 Posts: 19
|
Posted: Thu Sep 15, 2005 11:54 pm Post subject: |
|
|
Hi again
Yep I purchased the Kit with the CIC so it disables the protection on my pal machine.
Also got the T connector, so that I could boot DSP roms
I can't wait to get it, just emulators don't do it for me
I need the real thing with the right graphics and sound
Also there's one rom that I does not emulate properly and that is Weapon Lord. |
|
Back to top |
|
|
undo
Joined: 27 Jan 2005 Posts: 6
|
Posted: Sat Sep 17, 2005 3:53 pm Post subject: |
|
|
joshwaan2k,
hm, why did you order a NTSC CIC? You can't plug your flashcart with that onboard straight into your PAL SuperFamicom. And as you've ordered the TConnector your SuperFamicom will use the CIC from the PAL cart that's inserted in the back eliminating any need for a CIC whatsoever. _________________ love asm. loath oop. |
|
Back to top |
|
|
FloBo
Joined: 19 Sep 2004 Posts: 61
|
Posted: Sat Sep 17, 2005 9:29 pm Post subject: |
|
|
@WhiteDRG: did you ever think about offering this pdf on a web-page? I'd host it for you, if you like... I've got a little rom-hacking-site running at [url="http://www.digisalt.de"]digisalt.de[/url]. So if you're interested,...^^ |
|
Back to top |
|
|
joshwaan2k
Joined: 13 Aug 2003 Posts: 19
|
Posted: Sun Sep 18, 2005 1:53 am Post subject: |
|
|
Hello undo
I was under the impression that the CIC chip disables the lockout 50/60hz thing found on the Pal machine.
I thought it might get rid of the black boarders when playing a USA rom on the pal machine.
Cheers
Josh |
|
Back to top |
|
|
undo
Joined: 27 Jan 2005 Posts: 6
|
Posted: Sun Sep 18, 2005 11:15 am Post subject: |
|
|
joshwaan2k,
No, CIC's are part of the regionprotection. If a PAL machine can't find a PAL CIC on the cart it won't allow the code to execute, and vice versa with NTSC.
In order to disable the regionprotection on your machine you need to cut (or ground) a pin on the lockout chip inside your SuperFamicom. And to enable switchable 50/60hz video (this'll remove the borders if you run at 60hz) you'll need to add a switch and do some more soldering and wiring inside your machine. _________________ love asm. loath oop. |
|
Back to top |
|
|
joshwaan2k
Joined: 13 Aug 2003 Posts: 19
|
Posted: Sun Sep 18, 2005 10:38 pm Post subject: |
|
|
Hi Undo
Thanks for clearing that up
now I understand, so in order to play a US rom in 60hz I need to modifiy the console.
Is there any tuturioals to do this? |
|
Back to top |
|
|
joshwaan2k
Joined: 13 Aug 2003 Posts: 19
|
|
Back to top |
|
|
WhiteDRG
Joined: 25 Jan 2005 Posts: 41
|
Posted: Tue Sep 20, 2005 11:23 am Post subject: |
|
|
@FloBo : PM sent ! |
|
Back to top |
|
|
|