| View previous topic :: View next topic |
| Author |
Message |
jjftails35
Joined: 17 Apr 2006
Posts: 1
|
 Posted: Mon Apr 17, 2006 12:31 am Post subject: Question for Dreamwriter Software |
 |
|
Hey, I'm new here, and I don't quite know if I am posting this in the correct area, please forgive me if I am not. And thanks Tomy for the flash card and everything  .
Some laptops have Paralell ports built into their video cards and they have different port numbers other than the ones you can choose from in the dreamwriter software. You should let users specify the port number with a textbox so that they can choose whichever port they want. As for now, I have just looked at the ini file and saw that the data for which port to use was in there. If I changed that to what port I want to use, would that work? Replys would be appreciated.
Thanks,
Josh. |
|
| Back to top |
|
 |
Tomy
Site Admin
Joined: 02 Aug 2005
Posts: 414
|
| Posted: Wed Apr 19, 2006 2:46 pm Post subject: |
|
|
| What port address you're using now ? DreamWriter can set different port address from setup icon. |
|
| Back to top |
|
|
OGR3
Joined: 23 May 2006
Posts: 6
|
| Posted: Tue May 23, 2006 9:13 am Post subject: |
|
|
| Thanks for poking around with the ini, jjftails35. To answer your question, yes changing that to your LPT port will definately work. I use a non-standard LPT port address (0xeff0) because I use a PCI parallel card. Setting the first line to "eff0" worked like a dream. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
