View previous topic :: View next topic |
Author |
Message |
massiva
Joined: 01 Oct 2007 Posts: 14 Location: Japan
|
Posted: Sun Oct 21, 2007 9:25 am Post subject: PCE-PRO 32M flash Cart trouble |
|
|
Hello,
I bought "PCE-PRO 32M flash Cart." However, I am troubled in order that my
PC may not recognize a card...
I prepared the parallel cable and the USB cable and connected PC and the
card. OS which I am using is Win98SE.
PC bios was set as EPP.
I started Dream Writer 1.5.
The number of the printer port was also set as 378. BIOS was also set as
378.
However, nothing is displayed on BOX of Dream Writer 1.5, but it is
displayed as "0Mb(0KB) Size Free."
I tried to transmit data. However, it was displayed as "Not enough free
space for fix this game", and was not able to transmit....
I changed a setup of the parallel port and tried repeatedly. However, the
result was the same. PC is a thing like which does not recognize the card...
When I started the card with PC engine GT(Japanese), the preset game started
satisfactorily....
Please teach the good method for making PCE-PRO recognize to PC. Would you
help me if you please?
Moreover, since the problem occurred also in GG-PRO, I worry... |
|
Back to top |
|
|
MrCheese
Joined: 07 Sep 2007 Posts: 103
|
Posted: Sun Oct 21, 2007 5:19 pm Post subject: |
|
|
Things to check:
Is the parallel cable straight through or cross over? It should be straight through.
Is the USB from the motherboard or via a powered hub? I use a powered hub.
Change the USB cable - sometime they don't work - no idea why.
Check the switch is set to on on the cart / programmer
As it is not working for SMS and PCE I think it is setup or cable related. Can you try it on another PC? |
|
Back to top |
|
|
massiva
Joined: 01 Oct 2007 Posts: 14 Location: Japan
|
Posted: Mon Oct 22, 2007 1:50 am Post subject: |
|
|
Thank you for the reply!
powered hub...I think that I will also try.
I tried on three sets of PCs. However, it was the same result.
Although selection of a cable is also regarded as right....
I ordered the cable from TOTOTEK. |
|
Back to top |
|
|
MrCheese
Joined: 07 Sep 2007 Posts: 103
|
Posted: Mon Oct 22, 2007 11:23 am Post subject: |
|
|
What version of Dreamwriter are you using? You need to install v 1.4 and then copy the 1.5 EXE in and use that. |
|
Back to top |
|
|
massiva
Joined: 01 Oct 2007 Posts: 14 Location: Japan
|
Posted: Tue Oct 23, 2007 12:36 am Post subject: |
|
|
>>MrCheese
Yes. I replace with 1.5 and using it. |
|
Back to top |
|
|
MrCheese
Joined: 07 Sep 2007 Posts: 103
|
Posted: Tue Oct 23, 2007 11:26 am Post subject: |
|
|
Is it working now? |
|
Back to top |
|
|
massiva
Joined: 01 Oct 2007 Posts: 14 Location: Japan
|
Posted: Sat Oct 27, 2007 9:32 am Post subject: |
|
|
>>MrCheese
Hello!
My PC does not yet recognize a card... |
|
Back to top |
|
|
MrCheese
Joined: 07 Sep 2007 Posts: 103
|
Posted: Sat Oct 27, 2007 9:50 am Post subject: |
|
|
Did you try anything I suggested above? |
|
Back to top |
|
|
massiva
Joined: 01 Oct 2007 Posts: 14 Location: Japan
|
Posted: Sat Oct 27, 2007 10:23 am Post subject: |
|
|
It was not able to start, although I tried the new cable which arrived from TOTOTEK.
Powered hub has not been got yet.. |
|
Back to top |
|
|
massiva
Joined: 01 Oct 2007 Posts: 14 Location: Japan
|
Posted: Mon Oct 29, 2007 7:36 am Post subject: |
|
|
I bought Poweredhub today.
And, I connected it.
However, the result was the same,displayed as "0Mb(0KB) Size Free." |
|
Back to top |
|
|
MrCheese
Joined: 07 Sep 2007 Posts: 103
|
Posted: Mon Oct 29, 2007 10:14 am Post subject: |
|
|
Try it on another PC. |
|
Back to top |
|
|
massiva
Joined: 01 Oct 2007 Posts: 14 Location: Japan
|
Posted: Wed Oct 31, 2007 7:22 am Post subject: |
|
|
I tried on 1 desktop PC and 2 notebook PCs. However, it was the same result.... |
|
Back to top |
|
|
MrCheese
Joined: 07 Sep 2007 Posts: 103
|
Posted: Wed Oct 31, 2007 1:29 pm Post subject: |
|
|
Hmm I think you need to contact Tomy. I have nothing else to suggest. |
|
Back to top |
|
|
moddy
Joined: 20 Aug 2007 Posts: 6
|
Posted: Wed Oct 31, 2007 5:53 pm Post subject: Re: PCE-PRO 32M flash Cart trouble |
|
|
massiva wrote: | Hello,
I bought "PCE-PRO 32M flash Cart." However, I am troubled in order that my
PC may not recognize a card...
I prepared the parallel cable and the USB cable and connected PC and the
card. OS which I am using is Win98SE.
PC bios was set as EPP.
I started Dream Writer 1.5.
The number of the printer port was also set as 378. BIOS was also set as
378.
However, nothing is displayed on BOX of Dream Writer 1.5, but it is
displayed as "0Mb(0KB) Size Free."
I tried to transmit data. However, it was displayed as "Not enough free
space for fix this game", and was not able to transmit....
I changed a setup of the parallel port and tried repeatedly. However, the
result was the same. PC is a thing like which does not recognize the card...
When I started the card with PC engine GT(Japanese), the preset game started
satisfactorily....
Please teach the good method for making PCE-PRO recognize to PC. Would you
help me if you please?
Moreover, since the problem occurred also in GG-PRO, I worry... |
Hi Massiva
Your problem like me.
http://tototek.com/phpBB2/viewtopic.php?t=1549
Please set your printer port Bios
To EPP Mode 278
Dream Writer 1.4 version ,It work.
Moddy |
|
Back to top |
|
|
massiva
Joined: 01 Oct 2007 Posts: 14 Location: Japan
|
Posted: Thu Nov 01, 2007 3:51 am Post subject: |
|
|
>>moddy
Hello.
Thank you for the reply and the advice.!
I set the BIOS number of a printer port to EPP 278.
And I uninstalled Dream Writer 1.5 and installed Dream Writer 1.4,
printer port number set to 278 on Dream Writer 1.4.
But,displayed as "0Mb(0KB) Size Free." ...
GG-PRO and MD-PRO works fine.Only PCE-PRO is not recognized. |
|
Back to top |
|
|
|