View previous topic :: View next topic |
Author |
Message |
Vlcice
Joined: 01 Jan 2008 Posts: 35
|
Posted: Tue Jan 01, 2008 10:53 pm Post subject: A few SF7 questions - SPP parallel mode? |
|
|
I'm planning on getting a GD SF7 soon, but there are a couple of things I'm not entirely clear on and thought I'd try asking about. I e-mailed Tomy too, but thought it was worth checking here too.
I'm not enturely clear on what power adapters it will or will not accept. I have a spare Genesis 1 power adapter (9V, 1.2A). Is that compatible?
I'm pretty sure I have a compatible parallel cable already, but is the SF7's port female or male?
Will the SF7 accept any amount of RAM? I was thinking of getting 96M, since there's nothing larger than Star Ocean, but I wasn't sure if it required even multiples of 32 and would want 128M instead.
Last edited by Vlcice on Sat Jan 05, 2008 3:44 am; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
madman
Joined: 07 Jul 2006 Posts: 598
|
Posted: Wed Jan 02, 2008 2:07 am Post subject: |
|
|
The Genesis adapter will work fine. The LPT port is female. You can put any of the available RAM boards into an SF7. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Vlcice
Joined: 01 Jan 2008 Posts: 35
|
Posted: Wed Jan 02, 2008 2:51 am Post subject: |
|
|
Thanks! That tells me everything I need to know before ordering, then. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Vlcice
Joined: 01 Jan 2008 Posts: 35
|
Posted: Sat Jan 05, 2008 3:49 am Post subject: |
|
|
To follow up on my previous questions, there's something I've been trying to find out in looking up information on the GDSF7's parallel support.
What exactly does it require? Will basically any parallel port-equipped computer work? I'm looking at using the SF7 with ucon64 on a Linux machine with an SPP-only parallel port. I did see a post mentioning elsewhere that ECP/EPP isn't required for the Game Doctor devices, so does that mean an SPP-only port will work?
I also noticed that ucon64's SF7 options don't appear to support reading ROMs over parallel port, only sending them. Is that an ucon64 limitation, or is it not possible to dump ROMs via parallel using any software? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kyuusaku
Joined: 26 Jul 2003 Posts: 941 Location: .ma.us
|
Posted: Sat Jan 05, 2008 7:06 pm Post subject: |
|
|
All copiers until Dr V64 just need SPP/bidirectional. Most copiers from there are EPP, but I imagine many are still SPP. No copiers require ECP and I would recommend using strict EPP since SPP and EPP can coexist almost perfectly where ECP can't. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Vlcice
Joined: 01 Jan 2008 Posts: 35
|
Posted: Sat Jan 05, 2008 9:07 pm Post subject: |
|
|
Thanks for your answer, Kyuusaku! Hopefully that should be all I need to know. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Bishop702
Joined: 17 Dec 2007 Posts: 29
|
Posted: Tue Jan 08, 2008 3:09 am Post subject: just setup my SF7 with 96m of memory |
|
|
Ok, i just setup mine up about 2 weeks ago.
Here are some issues I had and over came for the most part. Hope this helps
1. Set up your computer port for EPP and it gives you an option usually for version 1.7 and 1.9. I had issues with UCON64 recognizing the SF7 with 1.9 so I use 1.7 .....
2. It is a pain to run off XP.. I tried alot of programs but still no connection with UCON to the port. I just used Win 98 on a seperate drive.. Actually I just baught a Pentium III online for 30 bucks and now use it with WIN 98se as my game loader. UCON64 RUNS GREAT, QUICK and STABLE!!! U can also used the programs designed for the SF7 but its dos based and UCON64 with its frontend works the best.
3 For a cable you need a DB25 male to male Straigt through cable..Not a nule modem cable. I have used one as long as 25 feet.
4. Power adapter- If you are not sure, when you get it, look on the underside and it will tell you what range of current it excepts and has a small diagram about the current for the plug, it shows you what is negative and what is positive.. I just baught a n adapter at a game shop that had a current and plug..
5. UCON64- I use the newest version with its frontend.
I use it to convert my SMC,FIG and any other format to
SF7 roms to my SF7 ROM DIRECTORY. You do not have
to split the files, just use ucon64 to send the file under
GD6 protocal and the copier will split the file into memory banks automatically. also you convert all roms though into GD3 format
So Convert files to GD3 and send files with GD6 protocal.
I did get STAR OCEAN to load and play with 96m with no problem, bu to find it was hell.
Hope this helps... I love my SF7, very stable |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|