| View previous topic :: View next topic |
| Author |
Message |
KingRanger
Joined: 08 Mar 2004
Posts: 7
|
 Posted: Tue Mar 09, 2004 10:42 pm Post subject: New Doctor SF7 doesn't work |
 |
|
| I put the ram in like I am supposed to. I plug it in. I get an error msg I think that is in chinese. If i put a floppy in i get an error like DISK ERROR and either way I do it I get no response when trying the menus. I paid alot for this and I need it to work what should I do |
|
| Back to top |
|
 |
KingRanger
Joined: 08 Mar 2004
Posts: 7
|
| Posted: Wed Mar 10, 2004 2:27 am Post subject: Still doesn't work |
|
|
| Ok I bought a power supply. Tried to convert over 12 roms to the correct format using ucon64 and nothing works. I get the error "Disk error wcm" i have no idea what this means. I have read that some people have got this copier and have had bad floppie drives. If this is the case I hope that tototek replaces the unit as the description is "Working etc etc" I can not even go through any menus for this device. I have downloaded icq in hopes i get a reply. And I have sent emails. And so far nothing. I hope some one replies. I spent over 75 bucks for this and I hope some one can get it working. |
|
| Back to top |
|
|
KingRanger
Joined: 08 Mar 2004
Posts: 7
|
| Posted: Wed Mar 10, 2004 4:30 am Post subject: |
|
|
| I got it to load stuff for a while and even the menus worked. But now all I get is the load rom bottom menu. If a file isn't in memory is just black screens. If rom is loaded the rom works. But i get none of the full menus and options now. This is getting really tiresom. Does anyone from tototek check their emails,or their boards or thier icq msgs. I will give this till tomorrow then I will have to take more action of i do not get some tech help from tototek. |
|
| Back to top |
|
|
KingRanger
Joined: 08 Mar 2004
Posts: 7
|
| Posted: Wed Mar 10, 2004 4:55 am Post subject: |
|
|
| I can load roms and i can play them and they are saved in the memory. But I get no menus. If I unplug the power from the copier i see the menus but i can't do anything as I get the "Disk error wcm" and you can do nothing else. I want to be able to use the menus and such. Can some one PLEASE help me |
|
| Back to top |
|
|
segabob
Joined: 05 Mar 2004
Posts: 79
Location: USA
|
| Posted: Wed Mar 10, 2004 5:48 pm Post subject: Info |
|
|
To get to the menu when you turn on your snes make sure you are pushing in the 2 top pads (top right-Top left) on you controller in.
That takes you into the menu.
If you have a disk in it will start loading after 3 seconds from disk or memory.
You might what to try another Snes system I have had some before that did not like the Back up units.
 |
|
| Back to top |
|
|
segabob
Joined: 05 Mar 2004
Posts: 79
Location: USA
|
| Posted: Wed Mar 10, 2004 8:31 pm Post subject: Re: New Doctor SF7 doesn't work |
|
|
| KingRanger wrote: | | I put the ram in like I am supposed to. I plug it in. I get an error msg I think that is in chinese. If i put a floppy in i get an error like DISK ERROR and either way I do it I get no response when trying the menus. I paid alot for this and I need it to work what should I do |
You can find the Instruction manual here
http://www.emucamp.com/red/SNES/PSF2.html
More info here: http://www.gamedoctor.us/ |
|
| Back to top |
|
|
KingRanger
Joined: 08 Mar 2004
Posts: 7
|
| Posted: Thu Mar 11, 2004 10:18 am Post subject: Re: New Doctor SF7 doesn't work |
|
|
| segabob wrote: | | KingRanger wrote: | | I put the ram in like I am supposed to. I plug it in. I get an error msg I think that is in chinese. If i put a floppy in i get an error like DISK ERROR and either way I do it I get no response when trying the menus. I paid alot for this and I need it to work what should I do |
You can find the Instruction manual here
http://www.emucamp.com/red/SNES/PSF2.html
More info here: http://www.gamedoctor.us/ |
Yeah everything is working except no matter what i do i get no menus |
|
| Back to top |
|
|
segabob
Joined: 05 Mar 2004
Posts: 79
Location: USA
|
| Posted: Thu Mar 11, 2004 6:19 pm Post subject: Re: New Doctor SF7 doesn't work |
|
|
| KingRanger wrote: | | segabob wrote: | | KingRanger wrote: | | I put the ram in like I am supposed to. I plug it in. I get an error msg I think that is in chinese. If i put a floppy in i get an error like DISK ERROR and either way I do it I get no response when trying the menus. I paid alot for this and I need it to work what should I do |
You can find the Instruction manual here
http://www.emucamp.com/red/SNES/PSF2.html
More info here: http://www.gamedoctor.us/ |
Yeah everything is working except no matter what i do i get no menus |
Do you have another Controller or Snes system to try.
If you can't get the menu when you turn it on with both buttons pushed I would think it's the signal from the controller that could be at fault. |
|
| Back to top |
|
|
KingRanger
Joined: 08 Mar 2004
Posts: 7
|
| Posted: Fri Mar 12, 2004 1:49 am Post subject: |
|
|
| Thank you very much segabob that fixed it right up. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
