View previous topic :: View next topic |
Author |
Message |
kawalrhode
Joined: 07 Feb 2004 Posts: 6 Location: London, UK
|
Posted: Sat Feb 07, 2004 9:17 pm Post subject: problems with MD-PRO 64 Flash Kit |
|
|
I received mr MD-PRO flash kit today. I have become very frustrated trying to get it to work however and was hoping that someone could help me since Tototek have not replied to my emails. The flash card came with some preinstalled games and I can verify that most of these worked fine on my PAL megadrive. However, when I connect the flash card to the PC I always get "NO CARD FOUND". I have checked the parallel cable, verified that 5V is present on the USB cable, set my parallel port to EPP, and checked the parallel port address. Can anybody help ???????? Please. |
|
Back to top |
|
|
Suppafly
Joined: 23 Jul 2003 Posts: 191 Location: Mexico
|
Posted: Tue Feb 10, 2004 11:28 pm Post subject: |
|
|
Try it on different computers first! |
|
Back to top |
|
|
kawalrhode
Joined: 07 Feb 2004 Posts: 6 Location: London, UK
|
Posted: Wed Feb 11, 2004 9:07 am Post subject: |
|
|
I have tried it on two computer already with no luck. Any more advice ? |
|
Back to top |
|
|
Tongueman
Joined: 12 Dec 2003 Posts: 39 Location: Japan
|
Posted: Thu Feb 12, 2004 1:30 am Post subject: Re: Problems |
|
|
I had the same problems with my flash cart for the MD and for the SMS. Try this: Reboot your computer, plug in the MD-programmer & flash cart and turn on the programmer. Then start the DreamWriter software. Does it detect it now?
I found that if I program my flash cart, then remove it and try to program it again, the software can't detect it. I have to reboot each time I want to program it. |
|
Back to top |
|
|
kawalrhode
Joined: 07 Feb 2004 Posts: 6 Location: London, UK
|
Posted: Thu Feb 12, 2004 6:59 pm Post subject: |
|
|
Tongueman, thanks for the suggestion. I have tried what you said but still I cannot get the software to recognise the flash card. One thing I did notice is if I copy the contents of the flash card to the PC, the software writes a 160Kb file which when booted using an emulator shows the multiboot screen. So the PC can read the card although it only reads the first few Kb. I think I am going to send the card back to Tototek now cos I have wasted several days now trying to get it to work. |
|
Back to top |
|
|
Tomy Site Admin
Joined: 02 Aug 2005 Posts: 414
|
Posted: Fri Feb 13, 2004 2:22 am Post subject: |
|
|
Can you tell what is your CPU speed/brand, chipset, mother board ? Thank you. |
|
Back to top |
|
|
mr-monday
Joined: 23 Jul 2003 Posts: 8 Location: London
|
Posted: Tue Feb 17, 2004 1:02 pm Post subject: |
|
|
Try changing the speed settings of the printer port in the Dreamwriter software. I have to change mine to the second from the left, close and reopen the program, then my card is detected. |
|
Back to top |
|
|
Tomy Site Admin
Joined: 02 Aug 2005 Posts: 414
|
Posted: Wed Feb 25, 2004 6:10 pm Post subject: |
|
|
problem solved ? |
|
Back to top |
|
|
acem77
Joined: 25 Jul 2003 Posts: 180 Location: usa,ohio
|
Posted: Wed Feb 25, 2004 7:01 pm Post subject: |
|
|
try a diff printer port option from your pcs bios. thats what i had to do to get it to work.
carts pluged in right, switch is on? it can be a little thing ..
try a few more pcs. cant hurt
what is your os 9X, 2000, xp
kawalrhode
what would you sell it for. i am sure it will work.
there is no for sure easy way to get this stuff to work on every pc.
its the nature of the beast. i have a sf7. it works great from one pc but not one option will get it working good for a diff pc. but on that pc everying else i have works great, md-pro,mgd2,neogeo pocket flash, gba flash, |
|
Back to top |
|
|
kawalrhode
Joined: 07 Feb 2004 Posts: 6 Location: London, UK
|
Posted: Wed Feb 25, 2004 7:22 pm Post subject: no luck at all |
|
|
Ok - thanks for everybody's help with this problem. I have now tried everything that has been mentioned and a few others. I have also tried on 6 different PCs now. Still not working. Tomy, I have no option but to return it to you so that you can take a look. I have been away for a week hence I have not replied to messages but I will now send this back to Tomy and hope that he can let me have one that works. |
|
Back to top |
|
|
dbjh
Joined: 02 Aug 2003 Posts: 167
|
Posted: Thu Feb 26, 2004 1:28 am Post subject: Re: no luck at all |
|
|
Last resort: uCON64? http://ucon64.sourceforge.net. I don't expect it will work, but you'll never know until you try. Warning: command line tool (frontend is finally making progress). |
|
Back to top |
|
|
kawalrhode
Joined: 07 Feb 2004 Posts: 6 Location: London, UK
|
Posted: Wed Mar 03, 2004 9:20 pm Post subject: re: UCON64 |
|
|
Well, UCON64 worked !!!!!!!!!!!!!! I am very happy. Thanks dbjh for the suggestion. I just don't know why the Tototek software failed.
Anyway, can anybody tell me if UCON64 can support multiroms and more than 32M ? |
|
Back to top |
|
|
dbjh
Joined: 02 Aug 2003 Posts: 167
|
Posted: Wed Mar 03, 2004 10:25 pm Post subject: Re: re: UCON64 |
|
|
kawalrhode wrote: | Well, UCON64 worked !!!!!!!!!!!!!! I am very happy. Thanks dbjh for the suggestion. |
Nice to hear that :-) You're very welcome.
kawalrhode wrote: | I just don't know why the Tototek software failed. |
Me neither. It's very strange, because uCON64 contains the ported code of DreamWriter. DreamWriter is written in Delphi, uCON64 is written in C. The only explanation I have is that perhaps the I/O drivers used by DreamWriter are too slow.
kawalrhode wrote: | Anyway, can anybody tell me if UCON64 can support multiroms and more than 32M ? |
Sure. That 32 Mbit limit for dumping is just the result of me being lazy. Since there are flash cards of 32 Mbit and of 64 Mbit I decided to just limit the the maximum size uCON64 will read so that it won't crash or otherwise do perhaps bad things to 32 Mbit flash cards. If ToToTEK (probably Leo) would provide me with enough information how to differentiate between a 32 Mbit flash card and a 64 Mbit flash card then I could add some code to uCON64 so that it can dump 64 Mbits. However, it seems that exactly the detection code of DreamWriter is causing problems for many people. Another solution is to add yet another option to uCON64 to tell it how much should be read from a flash card.
uCON64 can create a multirom for your MD-PRO. You should use the option -multi for that. You need a loader binary though. You can download it from the homepage.
Creating a multirom (for a 64 Mbit flash card) can be done with a command like this:
Code: | ucon64 -multi=64 mdpacku4.zip game1.smd game2.mgd game3.bin mymultirom |
Then you can send it with:
Code: | ucon64 -xmd mymultirom |
The strange game information you see is caused by the fact that Leo did not use the usual locations to store info about the loader.
Some games check on what kind of system they run and need special handling. You can use the switch -region for that. Say game1.smd runs only on PAL systems while you have a Genesis (NTSC). You could use the following command:
Code: | ucon64 -multi=64 mdpacku4.zip game1.smd game2.mgd game3.bin mymultirom -region=2 |
But usually it's better to use 'x' as argument for -region. So:
Code: | ucon64 -multi=64 mdpacku4.zip game1.smd game2.mgd game3.bin mymultirom -region=x |
I hope this information will be of help. Like I wrote before, a frontend is in the works which will make some of these operations a bit easier. |
|
Back to top |
|
|
kawalrhode
Joined: 07 Feb 2004 Posts: 6 Location: London, UK
|
Posted: Wed Mar 03, 2004 11:18 pm Post subject: ucon64 |
|
|
Thanks very much for all the tips. I have tried it all out and it works fine - just been enjoying Alien Soldier and Panorama Cotton !
|
|
Back to top |
|
|
Suppafly
Joined: 23 Jul 2003 Posts: 191 Location: Mexico
|
Posted: Fri Aug 27, 2004 9:18 pm Post subject: |
|
|
Glad theres one more happy tototek customer.
Topic closed! _________________ MSG ME IF YOURE SELLING GENESIS GAMES! |
|
Back to top |
|
|
|