View previous topic :: View next topic |
Author |
Message |
rpger_900
Joined: 21 Oct 2012 Posts: 8
|
Posted: Sun Oct 21, 2012 2:27 am Post subject: Need help transferring ROMS to GDSF7 with parellel port |
|
|
How do I do this using ucon64 gui? |
|
Back to top |
|
|
nickkipue
Joined: 20 Nov 2009 Posts: 12
|
Posted: Sat Nov 17, 2012 6:22 pm Post subject: |
|
|
I did that on mine.
iirc the command looks like ucon64 -xgd3 rom.sfc (without gui). Then progress bar appears. It will fill the banks of the gdsf7.
Also, you need to make sure you have the right cable type. The gdsf7 will show "link" on screen when you start the console holding the right trigger button if the cable is right. |
|
Back to top |
|
|
rpger_900
Joined: 21 Oct 2012 Posts: 8
|
Posted: Mon Nov 26, 2012 11:14 pm Post subject: |
|
|
I figured out how to get it working.
The mistake I was making was when I configured the path to the ucon64 executable I was selecting the ucon64 frontend instead of ucon64.exe.
Once I did that the program recognized the parellel port driver and I am able to transfer ROMS. |
|
Back to top |
|
|
Coffinspired
Joined: 15 Aug 2013 Posts: 12
|
Posted: Tue Apr 22, 2014 9:41 pm Post subject: |
|
|
I'm having problems transferring files to my GD7 from parallel. I'm just using a standard parallel cable. When you start the GD7 with the computer connected, in the right hand corner does it say "LINK" or "LINKING"? Mine just says linking and never changes. Anything I could be doing wrong? |
|
Back to top |
|
|
|