ToToTEK.COM

Riko78 · Joined: 11 Mar 2009 Posts: 134 Location: Italia

Hi ...

I have a Pro Fighter X Turbo with GG&GB Flash card 4mb :

I turn on the Super Nintendo (Pal Version) and in the GUI I go to Flash Card, I try to load the Game Gear Game (file.gg) but don't load :

-

...

but is correct ???

help !!!

Mystic_Merlin · Joined: 15 Oct 2007 Posts: 497 Location: Bangkok

I've had similar issues with my Smart Disc, which I can tell by looking at those screens, is a carbon copy of that PFX. Although I don't own a smart card, I've had issues loading SNES roms from floppies for 2 reasons:

- filename: if it's longer than standard DOS 8.3
- floppy: it's probably my floppy drive's head but some floppies work, some other don't.

The 1st thing you should try is using a good floppy which works fine loading some SNES roms and copy you GB game on it with a simple name such as GAME.GB.

Hope it helps

RGB_Gamer · Joined: 01 Oct 2007 Posts: 879

NorQue · Joined: 08 Jul 2006 Posts: 63

OMG, I'd kill for that GG/GB Smartcard...

With GB Smartcard GB ROM-Images need a Smartcard header, ucon64 can apply that. Maybe something similar is needed for Gamegear images? ucon64 doesn't have an option for that...

Riko78 · Joined: 11 Mar 2009 Posts: 134 Location: Italia

I try to change the file name from .gg to .ssc

is true ?

Tomy · Site Admin Joined: 02 Aug 2005 Posts: 414

Riko78,

Can you dump your copier bios ? Thanks

Riko78 · Joined: 11 Mar 2009 Posts: 134 Location: Italia

sorry Tomy,
how I can made a dump of BIOS ?

Tomy · Site Admin Joined: 02 Aug 2005 Posts: 414

First copy SF_1 and SF_2 to floppy.

1) Run SF_1
2) When it show press reset, you press reset to return to pfx menu
3) press select to goto utility menu
4) Save Data file to S1

5) Run SF_2
6) When it show press reset, you press reset to return to pfx menu
7) press select to goto utility menu
8 ) Save Data file to S2

7) Zip these two files (S1 and S2) and upload to forum or send email to tomy@tototek.com

Thank you very much ! Very Happy

Riko78 · Joined: 11 Mar 2009 Posts: 134 Location: Italia

OK Tomy,
after I send you the BIOS file...

thanks...

Mystic_Merlin · Joined: 15 Oct 2007 Posts: 497 Location: Bangkok

Videogamer555 · Joined: 01 May 2009 Posts: 102

What good is dumping the bios of the game coppier? It requires the actual hardware to be usefull. That is it is useless in an emulator.

Tomy · Site Admin Joined: 02 Aug 2005 Posts: 414

Thank you Mystic_Merlin, your bios is wokring for my Super Pro Fighter X. (not fully test yet, but seems ok) I'll test if my parallel adaptor is working or not. Because some customer buy Chinese bios to work on parallel adaptor. Now, they have a chance to have again English bios again.

Yes, it has Game Genie codes at the end of the file. So, it can auto input code for you after loaded game.

Yes, this tools mainly use on Super Pro Fighter X series. But if similar copier should work. (some older copier use 27128/27256, only need to dump Lo file is ok) I'm not sure if work for other copier. I just saw your other post, your FX32 is Pro Fighter clone.

Yes, it is too many similar copier out there. The father is SWC. Some engineer leave that company. (Like Intel and AMD) Then make many many different name. They are same. Only little bit different. So, if you have bios source code. Sure can make that bios to work for all.

Yes, it is very hard work to reverse engineering job to make bios 100% compatible to other copier.

Riko78 · Joined: 11 Mar 2009 Posts: 134 Location: Italia

Hi Tomy,

I follow you istruction and I attach t file S1 and S2 ...

and now ? Smile

Tomy · Site Admin Joined: 02 Aug 2005 Posts: 414

Riko78,

Thank you very much for your help. I got it working on my Pro Fighter X.

Riko78 · Joined: 11 Mar 2009 Posts: 134 Location: Italia

Hi Tomy,
I don't understand, because I don't know how I can load the File of Game Gear into a Flash Card 4mb using the ProFighter...