View previous topic :: View next topic |
Author |
Message |
panut
Joined: 29 Apr 2006 Posts: 1
|
Posted: Sat Apr 29, 2006 11:26 am Post subject: IC PAL 16V8 Problem on Super Pro Fighter Q+ |
|
|
My Super Pro Fighter doesn't include 2 IC , PAL 16V8 & 74LS245P, i know this for transfer data via perallel port and i want to do it.
My problem is about PAL16V8 , Anybody know how to program it?
and what will i program into it.
Thx for Advance.
PS. Sorry my english not strength |
|
Back to top |
|
|
kazmat
Joined: 18 Apr 2005 Posts: 122
|
Posted: Fri May 19, 2006 2:36 pm Post subject: |
|
|
I also want JEDEC file of PAL 16V8.
I have already CCL comport card & ProFighter with PALCE 16V8 & 74HC245P.
Can I copy 16V8 chip to another Lattice GAL ?
My programmer can write only Lattice GAL. |
|
Back to top |
|
|
kyuusaku
Joined: 26 Jul 2003 Posts: 941 Location: .ma.us
|
Posted: Sat May 20, 2006 3:36 pm Post subject: |
|
|
I think it's the same logic, I think you should try it using your existing 16V8 in the PFQ before you attempt to copy the 16V8. It will be hard to copy the 16V8 because it's read-protected. If you can manually copycat it's logic, you can put it into a Lattice GAL.
Tomy has the logic for the 16V8, if you can't do it, I think you can get it from him. Please consider lending your CCL card to him as well, his logic for his Pro Fighter adapter is not a 100% copy. |
|
Back to top |
|
|
kazmat
Joined: 18 Apr 2005 Posts: 122
|
Posted: Sun May 21, 2006 4:18 pm Post subject: |
|
|
Yes, my 16V8 in the PFQ is copy protected.
I could't read properly. |
|
Back to top |
|
|
|