![ToToTEK.COM Forum Index](templates/subSilver/images/logo_phpBB.gif) |
ToToTEK.COM Help & Support Forum
|
View previous topic :: View next topic |
Author |
Message |
Armathrillo
Joined: 17 Feb 2010 Posts: 3
|
Posted: Wed Feb 17, 2010 6:45 am Post subject: Burnt Programmer |
|
|
I have a V2 of the Super Flasher, and has been working beautifully for years. However, just recently, a trace on the circuit board connecting the USB power lead to the power switch caught fire, unexpectedly. I tried re-soldering the points with a small bit of wire, but unsuprisingly, the unit no longer functions.
My parallel port and USB ports are fine; they all still work with anything I plug into them. I know the programmer hardware has seen a few revisions, but has this happened to anyone before? Any recommendations on individual components to try replacing before I bite the bullet and purchase a new programmer?
Description: |
|
Filesize: |
81.45 KB |
Viewed: |
7898 Time(s) |
![Burnt Programmer.jpg](files/burnt_programmer_935.jpg)
|
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
MottZilla
Joined: 08 Sep 2004 Posts: 765
|
Posted: Wed Feb 17, 2010 7:57 pm Post subject: |
|
|
Are you sure that's the only trace that was damaged? Also, how did it catch fire?
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Armathrillo
Joined: 17 Feb 2010 Posts: 3
|
Posted: Thu Feb 18, 2010 12:06 am Post subject: |
|
|
I tested all the traces on the other side of the board, and everything seems to be intact. There aren't any visual hints at damage anywhere else, either.
As for why, I really can't say. I kept the programmer on a plastic tray, which didn't have any debris in or around it, with four little rubber feet separating the tray and the board. I had the programmer attached to my computer (both parallel and usb) at the time, and the unit was switched off. I tested the USB cable and USB port with an old scanner, and it worked. I also tested the parallel cable and port with a printer; no problems there, either.
My first thought was that the programmer's on/off switch had somehow gotten lodged in a position that was grounding the 5v feed, causing the trace to act like circuit breaker, but when hooked up to a tester, I couldn't recreate a scenario like that. Also, the wire I added to replace the trace doesn't get warm to the touch when I try to use the programmer, no matter what switch position I'm in.
Strange, eh?
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|