View previous topic :: View next topic |
Author |
Message |
Tomy Site Admin
Joined: 02 Aug 2005 Posts: 414
|
Posted: Sat Jul 11, 2009 7:21 am Post subject: |
|
|
Ok, it is the same. So, it may damaged. But have you clean all the contacts ? (Slot and Adapter pins)
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
RGB_Gamer
![](images/avatars/10484610554ca63f089f0d9.jpg)
Joined: 01 Oct 2007 Posts: 879
|
Posted: Sat Jul 11, 2009 7:38 am Post subject: |
|
|
Tomy wrote: | Ok, it is the same. So, it may damaged. But have you clean all the contacts ? (Slot and Adapter pins) |
Yes i have cleaned all the contacts. Does the LINKING message only come on if you have the GDSF3 and Parallel port connected to a CD-ROM drive or PC?
do you have another adaptor to sell?
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Tomy Site Admin
Joined: 02 Aug 2005 Posts: 414
|
Posted: Sat Jul 11, 2009 10:34 am Post subject: |
|
|
No, I don't connect the adapter to parallel port or CD-ROM. I just plug in SF3. Then hold 'R' to power on my SFC.
Sorry, I only have one, don't have another to sell.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
RGB_Gamer
![](images/avatars/10484610554ca63f089f0d9.jpg)
Joined: 01 Oct 2007 Posts: 879
|
Posted: Sat Jul 11, 2009 8:37 pm Post subject: |
|
|
Tomy wrote: | No, I don't connect the adapter to parallel port or CD-ROM. I just plug in SF3. Then hold 'R' to power on my SFC.
Sorry, I only have one, don't have another to sell. |
Yea I hold down R and powered on my system, but no message
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
MottZilla
Joined: 08 Sep 2004 Posts: 765
|
Posted: Sun Jul 12, 2009 5:53 am Post subject: |
|
|
What is your BIOS version? You never did say what you bios revision was. Maybe you need a bios update.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
RGB_Gamer
![](images/avatars/10484610554ca63f089f0d9.jpg)
Joined: 01 Oct 2007 Posts: 879
|
Posted: Sun Jul 12, 2009 5:59 am Post subject: |
|
|
MottZilla wrote: | What is your BIOS version? You never did say what you bios revision was. Maybe you need a bios update. |
Here's what I said before (page 2 of this thread):
eastbayarb wrote: | I plugged this Parallel Port Adapter in my GDSF3 but saw no CD-ROM option. Does the GDSF3 need to have a certain BIOS in order to use a CD-ROM drive? The BIOS on mine is V3.21 |
Tomy has a lower version of the GDSF3
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Tomy Site Admin
Joined: 02 Aug 2005 Posts: 414
|
Posted: Sat Jul 18, 2009 1:04 pm Post subject: |
|
|
eastbayarb :
Today I talk to my friend KI, he say he tested it before ship to you. So, the adapter should be ok. Now, I have no idea why you can't make it work. But if you have another SF3, please test it.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kazmat
Joined: 18 Apr 2005 Posts: 122
|
Posted: Sat Jul 18, 2009 2:20 pm Post subject: |
|
|
do you use CD7 drive for testing ?
I think GDSF3 and GDSF6 can't use CD7 drive.
Description: |
|
Filesize: |
147.04 KB |
Viewed: |
22200 Time(s) |
![2007-08-12 8-29-01_0011.jpg](files/2007_08_12_8_29_01_0011_855.jpg)
|
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Tomy Site Admin
Joined: 02 Aug 2005 Posts: 414
|
Posted: Sat Jul 18, 2009 4:58 pm Post subject: |
|
|
kazmat :
Thank you very much for the picture. It let me remember SF3 can connect to CD Drive. I already forgot it can.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
RGB_Gamer
![](images/avatars/10484610554ca63f089f0d9.jpg)
Joined: 01 Oct 2007 Posts: 879
|
Posted: Mon Jul 27, 2009 8:11 am Post subject: |
|
|
kazmat,
great picture, where'd you get it? Is that from the GDSF3 box? I wish I had that CD-ROM/Parallel Port atachment like the picture. I remember having it way back in the day, but I sold it. There was that one, and the SFC cartridge shaped one that I have now. Also, I didn't know that there was a DSP card for the GDSF3. I tried the DSP card for my GDSF7 on the GDSF3 but that doesn't seem to work. Does anyone know why the CD7 will not work with the GDSF7?
Tomy,
I have a new GDSF3 25-pin parallel port adapter and it works great with my version 1 Bung CD-ROM drive. The first 25-pin parallel port adapter that I bought from gamedoctorhk was bad.
I have both the CD7 and the version 1 Bung CD-ROM. The CD7 does not work with the GDSF3, but the version 1 Bung CD-ROM drive works with my GDSF3, GDSF6, and GDSF7.
Here is a pic of my setup. To the right of the Super Famicom, On top is the CD7, in the middle is the version 1 GDSF3, and on bottom is my Disk Dual for my SWC DX2
Description: |
|
Filesize: |
240.71 KB |
Viewed: |
22146 Time(s) |
![IMG_3707.jpg](files/img_3707_689.jpg)
|
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Mystic_Merlin
Joined: 15 Oct 2007 Posts: 496 Location: Bangkok
|
Posted: Wed Dec 22, 2021 1:34 pm Post subject: |
|
|
It took me more than 10 years but here I found 2 of those, and the original Bung ones none the less.
As mentioned in Tomy's first post, the one pictured is a clone made by CCL, you can tell from the PCB manufacturing quality.
The Bung PCBs always have a model number somewhere usually too.
So here we have the DS01F-1 and the DS01F-2 which are identical, only for a small trace that has been fixed in v2.
The components are exactly the same as the clone with a different layout as the clone one accomodates for a '139, a '04, a crystal and a DSP.
I doubt you can have both the DSP and the parallel / CD ROM card, it has to be one or the other, hence the check on the label.
Out of the 2 cards, only one works properly, I need to investigate what's wrong with the other one.
I also need to dump both BIOS when I get a new eprom programmer, mine is toast.
I tested the parallel transfer functions and the GD3 is surprisingly more stable than the GD7, less prone to errors.
I can't sadly test the CD-ROM functions as the specific caddy version needed for this machine would be impossible to find but I'm opened to suggestions and information about it.
Description: |
|
Filesize: |
184.41 KB |
Viewed: |
11761 Time(s) |
![5.jpg](files/2758_1640179930.jpg_743.jpg)
|
Description: |
|
Filesize: |
167.43 KB |
Viewed: |
11761 Time(s) |
![4.jpg](files/2758_1640179890.jpg_163.jpg)
|
Description: |
|
Filesize: |
195.07 KB |
Viewed: |
11761 Time(s) |
![3.jpg](files/2758_1640179866.jpg_178.jpg)
|
Description: |
|
Filesize: |
197.08 KB |
Viewed: |
11761 Time(s) |
![2.jpg](files/2758_1640179854.jpg_513.jpg)
|
Description: |
|
Filesize: |
84.52 KB |
Viewed: |
11761 Time(s) |
![1..jpg](files/2758_1640179828.jpg_144.jpg)
|
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|