ToToTEK.COM

[nscottm]

i've tried multiple roms and cartriges on the t connector and have verified the data is being written correctly and everything is facing the right way.
ntsc games and system. all i get is a blank screen. help would be much appreciated

[cd_vision]

Did you order your cart with a CIC-161 chip? Have you tried using different versions of the software to see if you get the same results?

[nscottm]

i dont have a CIC-161 and im trying version 2.3 as we speak (previously used 2.34)

[nscottm]

ive tried every program version of super flasher on the website and still no luck. please advise

[cd_vision]

The cart requires a cic-161. If you didn't order one then you'll need to desolder one off an actual snes cart and solder it onto the flash cart. Maybe then it will work for you.

[nscottm]

i though it wasnt necessary if the t-connector was used

[DjoeN]

If you use the T-Connector you have to use a NTSC/PAL game cart in the side (depending on your regio)

I you don't like to use the T-Connector, desolder the CIC from a gamecart of your regio and solder it on to the Flashcart.

You only need the T-Connector then for playing DSP games.

so in a few words:

PAL SNES -> NO CIC -> T-Connector -> PAL Game
US SNES -> NO CIC -> T-Connector -> US Game (NTSC)
Super Famicom -> NO CIC -> T-Connector -> Super Famicom Game (NTSC) dunno if it has to be a japanese gamecart, could be japanese and us lockoutchip is the same)

PAL SNES -> No T-Connector -> PAL CIC on Flashcart.
US SNES -> No T-Connector -> US CIC on Flashcart (NTSC)
Super Famicom -> No T-Connector ->JAPANESE CIC on Flashcart (NTSC) dunno if it has to be a japanese CIC, could be japanese and us lockoutchip is the same)

DSP Games on Flashcart -> Always use T-Connector with DSP Gamecart in the side

[nscottm]

seems like i'm doing everything right with the t-connector....any other ideas?