ToToTEK.COM

[RGB_Gamer]

Ok, I finally did it. I got my Disk Dual with the Compact Flash to IDE adaptor inside with a removeable Compact Flash! It was difficult, but the results look and work great.

Again, here is the Compact Flash to IDE adaptor that I bought at Fry's:

http://img90.imageshack.us/img90/8008/cf2idees7.jpg

So I opened up the Disk Dual, removed the rack that holds the CD/HD drives
and the metalic part that holds the rack and the front face together. I then cut some of the plastic from the face as shown here:

http://img90.imageshack.us/img90/6943/diskdualfacemodlr9.jpg

I also had to modify the rack that holds the CD/HD drives because it was obstructing the CF2IDE adaptor from accessing the modded Disk Dual face cut out. Here is a pic of the Disk Dual with CF2IDE adpator + 2gb CF card installed inside the case (the CF2IDE adaptor is held down with double stick tape):

http://img90.imageshack.us/img90/1213/diskdualcf2idejl8.jpg

Unfortunately, the IDE cable that is included in the Disk Dual wasn't long enough to connect to the CF2IDE adaptor when the CF2IDE adaptor was installed after I modded the CD/HDD rack/face, so I had to buy this weird IDE extender from Fry's as shown here:

http://img90.imageshack.us/img90/3866/ideextenderzd8.jpg

Here is my SNES setup after all was said and done (with my GDSF7 + CD7 setup next to it, waiting for the 64mb memory upgrade I ordered from tototek):

http://img90.imageshack.us/img90/6277/snessetupft1.jpg

The hardest part was modifying the metal on the CD/HDD rack to allow the CF2IDE adaptor to go as far forward as possible. For this, I had to cut the metal with a dremel, and flaten it out.

[CrackLtd]

Really cool mod. Congrats! To make it look absolutly 'l33t' you need to change from the SNES to the SFC. The Wildcard will fit much tighter on the SFC.

----------------------------------
#ToToTEK Channel on EFNet