View previous topic :: View next topic |
Author |
Message |
Luke
Joined: 21 Oct 2008 Posts: 13
|
Posted: Wed Oct 29, 2008 8:43 pm Post subject: Super flash cart problems |
|
|
I hooked up my programmer with flash cart with a DB25 male/male parallel cable and also with a USB cable. I downloaded Superflasher 2.34 and also put a bunch of .smc files in the Roms folder. Basically I can't get it to work at all, its like it doesn't even know the programmer is connected. I tried selecting all 4 different printer ports in the setup but it didn't work on any of them. I'm running XP.
I'm not a computer expert by any means and I was hoping the super flasher would be pretty simple to use. Can anyone let me know if there is something else I need to do to get it to work? I bought it used but it was in the original packaging and the guy I got it from said he had a Mac and never used it because it wouldn't work on a Mac. Thanks
Luke |
|
Back to top |
|
|
redviper
Joined: 09 Oct 2008 Posts: 6
|
Posted: Mon Nov 03, 2008 11:35 pm Post subject: |
|
|
Is your parallel port set to EPP mode? Check it in the BIOS. |
|
Back to top |
|
|
Luke
Joined: 21 Oct 2008 Posts: 13
|
Posted: Tue Nov 04, 2008 10:14 pm Post subject: |
|
|
Thanks that did it. |
|
Back to top |
|
|
Luke
Joined: 21 Oct 2008 Posts: 13
|
Posted: Thu Nov 27, 2008 10:11 pm Post subject: |
|
|
I've gotten my programmer to work on my desktop, but the bios settings were simple and straight forward. It was EPP or ECP and I set it for EPP. My laptop only has ECP, PS/2, and AT in the bios. Which of these settings do I use?
Thanks |
|
Back to top |
|
|
|