ToToTEK.COM

DjoeN

So after unwrapping it and connecting it, it all worked Flawless.

i placed the flashcartridge in a addams familly case, so that's nice protected (i ordered the cartridge with CIC 161 chip, it's a pitty it didn't came with a socket so i could remove the chip and placed another one in it)(it came soldered on the cartridge) So the first thing i did was testing PAL games with JAP and US al togheter.

Games in Test:

Donkey Kong Country (PAL)
Prince Of Persia 2 (US)
Rockman X (JAP)

Well Conclusion -> The all worked without a problem Smile

(I did tested Megaman X3, but it gives errors on boot and a black screen after the capcom logo, so i will use my original if i want to play megaman X3 Very Happy

)

So

Post your NON working games in the other thread i started.

Now Let's Roll the N64 kit out!!!

Jagasian · Joined: 08 Jun 2004 Posts: 159

Did the flash cart fit inside a SNES case or a Super Famicom case? I hope it fits in a SNES case because my original SNES died and I only have a redesigned SNES, which I want to keep in mint condition and therefore do not want to mod by tearing out the plastic nubs in the cart slot.

Once a few more people get their flash carts and post good reviews, I am going to buy one for myself.

DjoeN · Posted: Mon Jun 21, 2004 9:08 pm Post subject:

It fits in a PAL SNES case (same as JAP case).

You have to cut a very little inside the case.

And in a case it's way safer to use the cartridge Very Happy

kyuusaku · Joined: 26 Jul 2003 Posts: 941 Location: .ma.us

Rockman/Megaman X2-3 obviously will not work because of the flash cart's lack of a C4 ASIC...

ketotot · Joined: 12 Aug 2003 Posts: 53 Location: USA

DjoeN, did you connect an original cart with the C4 chip to the T-connector when you tested Mega Man X3?

Jagasian · Joined: 08 Jun 2004 Posts: 159

So I guess my question now is:
Is it possible for the flash cart to fit inside a USA SNES case?

DjoeN · Posted: Tue Jun 22, 2004 2:11 pm Post subject:

Yeah it fits in a US snes case and again you need to cut a little bit inside it (i did try this also out)

Smile

Jagasian · Joined: 08 Jun 2004 Posts: 159

ketotot · Joined: 12 Aug 2003 Posts: 53 Location: USA

My SuperFlash Cart just came in today. Can't wait to test it out!
I'll post any significant information that might be useful.

Tomy · Site Admin Joined: 02 Aug 2005 Posts: 414

DjoeN · Posted: Thu Jun 24, 2004 9:29 pm Post subject:

figured it out in the meanwhile Smile

I desoldered the chip and placed a socked in it with the chip in the socket to test it, anyway, chip is soldered back in it's place Smile

Thx Tommy, and keep up the good work.

kyuusaku · Joined: 26 Jul 2003 Posts: 941 Location: .ma.us

You could always socket it and wire the socket, not solder.