| View previous topic :: View next topic |
| Author |
Message |
Thunderwing
Joined: 13 Jul 2012
Posts: 5
|
 Posted: Mon Dec 24, 2018 2:57 pm Post subject: Can someone help me? |
 |
|
Hi People.
Im new to this stuff and have tried to sort this out myself for a few weeks now and I'm now at a point I need help.
I have a problem with a Game Doctor SF7, I bought this a while back, not knowing if it was working, I have since found my old snes (pal) and made sure it was working. I also purchased a 12v 1.2A power supply for the unit (center negative).
I have tried it in my snes and I dont get power to the SF7 no Floppy light and nothing but a black screen (no output), I have tried with a cart on the top of the unit and without both with the same black screen results. I have tried turning on the snes with the R button pressed but again, with no results.
My first question is do I have to do anything to my snes (total original non modded console)? secondly does the SF7 have a SMD fuse? I will admit, I have taken the thing apart and found that the floppy drive power has a 5v line but doesnt seem to have a negative only a white cable is this right?
Please if anyone can help?
Kind regards
Brian |
|
| Back to top |
|
 |
Tomy
Site Admin
Joined: 02 Aug 2005
Posts: 414
|
| Posted: Tue Dec 25, 2018 2:21 am Post subject: |
|
|
| Original Game Doctor SF7 is NTSC only. You need to install a PAL CIC or a cracked CIC to make it run on PAL SNES. Then check the power. If both good, it should have display and run. |
|
| Back to top |
|
|
Thunderwing
Joined: 13 Jul 2012
Posts: 5
|
| Posted: Tue Dec 25, 2018 11:02 am Post subject: cic |
|
|
Hi thanks for the quick reply, as i said im new to the scene and dont know what a Pal CIC is, is this something i need to do to the Snes or the Game Doctor SF7?
thanks for all your help |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
