ToToTEK.COM

eXo3k · Joined: 15 Jun 2009 Posts: 3

Hi,

i have 2 Questions concerning MGD2 and would be really appreciated if someone could help me out.

1: How can i convert an *.pce file to MGD(2) format. Let's say 'Raiden (J).pce' from 'GoodPCE Romset'. I tried to use ucon64 --mgd (with and without --swap option) but get always a white screen only if I want to run the Game on my PCE Core 2. Another already converted rom (not from GoodPCE set and not converted by me) runs without problems.

2: Can someone please explain me how to use the SNES DRAM Adapter?What are the leds and the button for? Is it compatible to Eur/Pal/Jap snes?

any help would be great. thanks in advance

Mystic_Merlin · Joined: 15 Oct 2007 Posts: 533 Location: Bangkok

For your 2nd question, the LEDs correspond to memory slots. If you have a 32M memory board, you have the following combinations:
- 1 LED = 8M, 8M x 4 games
- 2 LEDs = 16M, 12 or 16M x 2 games
- 4 LEDs = 32M, 20/24/32 x 1 game

Select your slot, load the game, press reset. To load another game, change the slot and do the operation again

Regarding the Jap/Eur region, I guess there must be a CIC chip in the DRAM adapter to switch for PAL compatibility.