ToToTEK.COM

[Henning]

Hello,

i'am still searching the following Multi Game Doctor 2 (mgd2) Stuff:

1 Meg SRAM Cards
2 Meg SRAM Cards
32 Meg DRAM Cards
The Backup Board + Backup Board Software
Game Boy I/0
and the Multi Captions Card

I prefer paymend via PayPal.

All the best,
Henning

[otmandy95]

hello. have you tried gamedoctorhk.com

[Henning]

yes but he didnt have the items that i'am searching...

[CrackLtd]

NeoGeo I/O still working?

[Mystic_Merlin]

Try
http://www.gamechoiceclub.com and http://stores.shop.ebay.com.hk/jayhui1986

What's the multi captions card?

[Thall]

If anyones got a copy of the backup board software, please post

[Mystic_Merlin]

I got 2 of these original orange makko floppies in a different place. I'll try to post the prog for you when I get there

[kyuusaku]

You should make disk images of the floppies, both for preservation and because the MGD2 (and others) often access data below the file system.

[Mystic_Merlin]

I haven't found 1 but at least 4 copies of these disks. I guess I was already cautious about preservation
A good thing since now both original floppies don't work...at least on my current MGD2 FDD. BTW I recently found a similar citizen 26 pins FDD with a 26<->34 pcb adaptor from an old compaq computer; if someone is interested in a picture let me know.

From what I remember there used to be 2 main utilities on the MGD2 that I compiled on one single standard dos format FD at the time.
1st utility for regular copy/format
2nd utility for backing up games with the board
I'm not sure there's a need for a disk image kyuusaku but I'll do one i you want.

I can barely remember what those utilities are for, here's a guess:
U4_0.X02 (G1)
IC = Information?
FU = Format Up? (1.6M?)
FH = Format High (1.44M)
FL = Format Low (720k)
DA = Delete All?
CD = Copy Disk?
CF = Copy File?

MGD2BP02.X02 (G2)
MD = Mega Drive
PC = PC Engine
SF = Super Famicom
GB = Game Boy
GG = Game Gear

[Henning]

Wow fantastic Mystic_Merlin, thank you for the files!!!

[Henning]

[kazmat]

Hi Henning

I have Neogeo I/O too. But not tested.

I hear the software needed to work Neogeo I/O.

Do you have it ?



Great post Mystic_Merlin.

I found my backup software is old one.(MGD2BP01.X02)

Thank you !!

[Thall]

Thanks for the file

Any chance you can winimage the floppy? Using this: http://www.winimage.com/download.htm

[Mystic_Merlin]

Here you go...made from the original disk, so only with the backup software.

Once again I doubt this makes a big difference as it doesn't seem to be a proprietary dos format, I'd be curious to know...

[kyuusaku]

It's not a proprietary format, but without a disk image it's not possible to low level compare with another disk for changes. Also I forget which tool but I remember hearing that one of them bootstraps off a sector or few.